Swish Building Plastics

Swish Building Products has retained the green standard BES6001 across its roofline range, with a ‘very good’ rating, details of which can be seen at the Green Book Live website. This delivers instant point wins to house builders under the Code for Sustainable Homes.

 

In retaining its ‘very good’ rating across itsPVC fascia, soffit, claddingand window board ranges, Swish is able to offer developers access to a product offer that gives them maximum points under the Code (tier level 1). No other cellular PVC manufacturer has achieved this level of certification.

 

    

     Rosewood,Woodgrain,Blackgrain,sherwood Oak,Irish Oak 

Jumbo Fascias - Bullnose

A 25mm thick replacement/newbuild fascia board with a traditional rounded lower edge. Designed to be fixed to rafter feet and bear the weight of eaves tiles and guttering without the support of a timber backing board or tilt fillet. Soffit engages by push fit. ...

read more...

Jumbo Fascias - Square

Jumbo fascia boards do not require a timber backing board. They carry the weight of the eaves tiles and the gutter and are BBA certified. code description colour size pack qty ...

read more...

Jumbo Fascias - Tudor Board

Swish Tudor boards can be used at gable ends or along the side of a house to create a decorative feature.Tudor Board is available as a 20mm thick, 150mm wide cellular PVC board in a standard 5m length. code description ...

read more...

16mm Fascias

Swish 16mm fascias boards are BBA Certified, do not require a backing board and will carry the weight of the eaves tiles and the gutter. code description colour size pack qty ...

read more...

M-Boss Facias

M-Boss - Square fascia profiles embossed with a decorative grained finish. The perfect combination of low-maintenance, cellular PVC with a traditional timber-like appearance. Matching M-Boss corners and joints available. code ...

read more...

M-Boss Joints & Corners

M-Boss fascia range is complemented with matching M-Boss corners and joints. The M-Boss pattern is moulded into the unit face. code description colour size pack qty ...

read more...

Capping Fascias - 9mm Cappit

9mm flat-backed refurbishment fascias or bargeboards for overcapping existing sound timber backing. Square return leg accommodates lay-on soffits. This board requires a timber backing board. code description col...

read more...

9mm Ogee Cappit

9mm fascias and bargeboards with an Ogee detail for refurbishing or overcapping sound existing timber components. Ribs allow the profile to stand off the backing board to promote the movement of air. Cappit has a return leg for lay-on soffit. ...

read more...

Trim & Fix - Joints

Purpose made fascia joints for the Swish Jumbo, 16mm and Cappit ranges of boards in Concealed Fix (with concealed lugs) and Face Fix formats. F/F = Face Fix C/F = Concealed Fix D/E = Double Ended code description ...

read more...

Trim & Fix - Internal Corners

Purpose made internal corners for the Swish Jumbo and Cappit ranges of fascia boards in Face Fix format.   D/E = Double Ended code description colour size pack qty ...

read more...

Trim & Fix - External Corners

Purpose made external corners for the Swish Jumbo, 16mm and Cappit fascia boards, in Concealed Fix (with concealed lugs) and Face Fix formats. F/F = Face Fix C/F = Concealed Fix D/E = Double Ended code description ...

read more...

Roofline Trims

Extruded roofline trims for joining soffit sections, supporting soffits at the wall and sealing the top of fascia boards in felt roof conditions. code description colour size pack qty ...

read more...

Fixings & Sealants

Low Modulus Silicone conforming to BS.5889 (Type A) for cladding and fascia joints. Allows movement of up to 50% of the joint width. High quality A4 marine grade stainless steel fixings. code description colour ...

read more...

Plain Soffits

GeePee plain soffit boards are 9mm thick. They also have a variety of uses as cover boards and lining boards. A 300mm fluted soffit board is also available. code description colour size ...

read more...

Vented Soffits

Polo 9mm ventilated soffit boards comply with UK Building Regulations for new build and replacement applications and provide the equivalent of a 10mm or 25mm air path as required. code description colour ...

read more...

Cladding as Soffit

Open V and Tee Gee cladding profiles used as soffit boards where enhanced detailing is required across a large area e.g. a porch ceiling or overhang. code description colour size pack q...

read more...

Vented Cladding as Soffit

Open V Polo and Tee Gee Polo soffit boards are cladding profiles that have pre-formed slots providing the equivalent of a 10mm continuous air path. They allow the creation of deep soffits where enhanced detailing is required. code ...

read more...

Soffit Joints

A range of general purpose vented and unvented trims for jointing soffit sections and supporting soffits at wall junctions. code description colour size pack qty ...

read more...

Jumbo Fascias - Ogee

A 20mm thick replacement/newbuild fascia board with an attractive Ogee detail. Designed to be fixed to rafter feet and bear the weight of eaves tiles and guttering without the support of a timber backing board or tilt fillet. Soffit engages by push fit. ...

read more...

Our trade counters are located at Ilkeston, Hinckley, Lincoln, Chesterfield, Doncaster , Langley Mill , Mansfield, Loughborough are open:
Monday to Thursday 7.30am - 4.30pm & Friday 7.30am - 4:00pm

© Copyright 2017. Seal Service Ltd. All Rights Reserved